Automatic Liquid Filling Packing Machine Beverage Machine
|FOB Price:||US $1,800-3,299 / Set|
|Min. Order:||1 Set|
|Min. Order||FOB Price|
|1 Set||US $1,800-3,299/ Set|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: AH-ZF1000
- Automatic Grade: Automatic
- Filling Valve Head: Single-Head
- Dosing Device: Plunger
- Packaging Container Lifting Structure: Chute Lifting
- Packaging: Bag
- Model: Ah-Zf1000
- Voltage: AC220V/50Hz AC380
- Packing Film Size: 320mm/240mm
- Size of Bag(Mm)W: 110-150mm(W)
- Dimension: 890*850*2000mm
- Trademark: Onfocus
- Specification: SGS
- HS Code: 8422301090
- Type: Volumetric Filling Machine
- Material Type: Liquid
- Feed Cylinder Structure: Single-Room Feeding
- Filling Principle: Pressure
- Structure: Rotary
- Packaging Material: Plastic
- Filling Range: 100-500ml
- Paper-Offering Motor: 250W/220V
- Size of Bag(Mm)L: 30-145mm(L)
- Main Motor Power: 370W/380V/220V
- Weight: 320kg
- Transport Package: Carton
- Origin: China
1. Main use
This machine can be widely used for packing various kinds of air free liquid, especially for bag packing of soy sauce, vinegar, fruit juice and other beverages (or iced beverage), bean milk, milk, mineral water, bean curd and liquid chemical products.
(2) Ultraviolet sterilization
(3) Thermal vertical sealing
(4) Date lamination
(5) Linear bag traction
(6) quantitative filling
(7) Thermal transverse sealing
(9) Automatic counting.
4.1, After use, wash away residual liquid in the pipe with water. Otherwise the residual liquid will be degenerative and affect the quality of product of next production. Remove plastic pipe transfusion and clean it with a brush. Keep it clean and dry.
4.2, Regularly check moving parts and oiling state and oil the machine with sufficient 20# lubricant or lithium based grease at any time. Otherwise the operation will be out of order and that will severely affect service life of machine.
4.3, Regularly check the machine and clean away foreign matters on the surface of transverse copper block. It is not allowed to have encrustation on the surface. Otherwise thermal conductivity will be reduced, the temperature of copper will rise, and hot transverse sealing and thermal cutting bag will be out of order.
4.4, In the case of finding abnormal phenomena, cut off power supply immediately. Restart after troubleshooting.
4.5, During production in winter with temperature under 0 degree, unfreeze the ice in quantitative pump and the pipes with hot water. Otherwise, connecting rod will be broken or the machine does not work.
4.6, Single sheet plastic film for the machine should be 80mm thick. The tension strength, even thickness, and lubricating property of film should be guaranteed. The weight of each roll of plastic should be controlled under 18kg (320mm) or 14kg (240mm). Transverse hot sealing temperature should be under 260 degrees. Poor thermal sealing or high failure rate of bag caused by employing single sheet plastic film not recommended by the manufacturer are not within extent of liability borne by the manufacture. Are not within extent of liability borne by the manufacture.
|Size of Bag(mm) L||30-145mm(L)|
|Size of Bag(mm) W||110-150mm(W)|
|Total Power||1.2KW 220V/380V|